Gen 1 Intimidator Ram Sleeve
- Description
-
Details
Replacement ram sleeve for your Gen 1 Intimidator. Will work on Gen 2 and 3 Intimidators with proper setup.
Please note: If you are not sure what style of ram sleeve you have it is very simple to tell. Gen 1 Ram Sleeve has a thin O-ring groove and the poppet base is not nearly as deep almost coming up to the lip of the ram sleeve, while Gen 2 Ram Sleeve has a thick O-ring groove and the poppet base is deep. Gen 3 Ram sleeve uses the same thick O-rings as Gen 2 however has a sloped poppet base.
If you have a Gen 2-4 ram sleeve we highly recommend using our U-cup seals in place of the O-rings called out in the manual. We made these specifically for ram sleeves and they will virtually eliminate any leaking or at the very least tell you if a body has been over anodized to the point of no return. Once installed you shouldn't need to change them.
- Specifications
-
Additions
Customizable Color Options Yes Manufacture Blast Warranty None Sku blast-100-643 Compatibility Gen 1 Intimidators, Gen 2 & 3 Intimidators w/ Correct Setup - Reviews
-
Add Your Review
